Home > Our Projects > Elevators for the State Industry
The lifts were replaced in a historic building that is under UNESCO protection. The building was founded in 1928. Over this period, the lifts have been repeatedly repaired and have become unusable for more than 90 years.
The customer decided to replace the lifts, but on the condition that the old interior and its elements were restored and remained unchanged.
Thus, it was possible to avoid damaging the architectural monument and make the lifts operational again for many years. The same concept was used to make lifts for the House of State Industry in all entrances of the facility.
Equipment:
● 6 Basic Comfort passenger lifts,
● load capacity 750, 1000, 1150 and 1275 kg,
● speed 1.6 m/s.
Finish:
● Cabin and doors: Clear glass Extra clear glass on ½ wall (side, rear, side), the rest of the cabin is finished in natural wood, Mahogany veneer (Mahogany)
● Ceiling: Natural wood, Mahogany veneer (Mahogany)
● Control panel: Brass 2.5 mm
Photos from the project
Installed Equipment
Passenger Lifts“Basic Comfort”
● 1 entrance,● duty load 1000 kg,● speed 1.6 m/s,● travel height 28.04 m● number of stops 7
Passenger Lifts“Basic Comfort”
● 3 entrance,● duty load 750 kg,● speed 1.6 m/s,● travel height 37,26 m,● number of stops 9
Passenger Lifts“Basic Comfort”
● 4 entrance,● duty load 1275 kg,● speed 1.6 m/s,● travel height 46,54 m,● number of stops 11
Passenger Lifts“Basic Comfort”
● 6 entrance,● duty load 1275 kg,● speed 1.6 m/s,● travel height 50,27 m,● number of stops 12
Passenger Lifts“Basic Comfort”
● 7 entrance,● duty load 1150 kg,● speed 1.6 m/s,● travel height 36,35 m,● number of stops 9
Passenger Lifts“Basic Comfort”
● 9 entrance,● duty load 1275 kg,● speed 1.6 m/s,● travel height 26,74 m,● number of stops 7
Completed
Supply of Elevator Equipment
Installation and Commissioning Works
Operational Deployment